Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title CR1 Crank Arms
Title

Title CR1 Crank Arms

$349.95
/
Option 1
Option 2
  • Low stock - 2 items left
  • Inventory on the way

(SPINDLE SOLD SEPERATLY)

SPECIFICATIONS

  • Three-piece design
  • 29mm crank spindle diameter
  • Aluminum pre-loader
  • Available in three lengths: 155mm, 160mm, 165mm
  • Machined from 7075 T6 aluminum
  • Anodized matte black or chrome finish
  • SRAM 8 bolt direct mount compatible only 
  • Chainring Not included
  • Compatible with Title CR1 spindle
  • Compatible with SRAM DUB 29mm bottom brackets only.

CHAIN COMPATIBILITY BY CHAINRING:

SRAM T-Type = Compatible with SRAM T-Type 12-speed drivetrains only

Shimano HG 12 = Compatible with Shimano HG12 12-speed chains such as:

  • XTR CN-M9100/M9200
  • XT CN-M8100/M8200
  • SLX CN-M7100/M7200

Regular = Compatible with most 9-12 speed drivetrains including the following:

  • All 9, 10, 11, & 12-speed SRAM drivetrains 
  • All 9, 10, & 11-speed Shimano drivetrains
  • All 9, 10, & 11-speed KMC chains
  • Single speed setups


Axle Selection & Frame Compatibility:

Select your axle width based on your frame's rear hub spacing, drivetrain standard, and required stay clearance. All widths are engineered to the same high-strength standard for everything from DJ to DH.

130mm

Chainline: 52mm
Q-Factor: 168.5mm
Arm Clearance: 70.25mm

Frame Fitment: Dirt Jump, XC, and Trail frames with 135mm, 142mm, or 148mm Boost spacing.
Standards: Matches SRAM Eagle Boost (52mm) and Shimano M9100 / M8100 / M7100.
Technical Note: Optimized for riders seeking the narrowest stance (Q-factor) on bikes with standard chainstay profiles.

136mm

Chainline: 55mm
Q-Factor: 174.5mm
Arm Clearance: 73.25mm

Frame Fitment: Modern 29er Trail and Enduro frames with high tire clearance and wide stays.
Standards: Matches SRAM Transmission (T-Type), SRAM DUB Wide, and Shimano M9120 / M8120 / M7120.
Technical Note: Required for SRAM T-Type systems. Provides +3mm lateral arm clearance per side to clear flared or oversized chainstays.

145mm

Chainline: 56.5mm
Q-Factor: 183.5mm
Arm Clearance: 77.75mm

Frame Fitment: Downhill (DH) and Super Boost+ frames.
Standards: Matches SRAM DUB DH, SRAM SB+(Super Boost), and Shimano M9130 / M8130.
Technical Note: Designed for 157mm rear spacing. Requires a 6mm offset chainring to maintain the 56.5mm chainline. Maximum clearance for reinforced gravity frames.


Weights

130mm spindle = 104g
136mm spindle = 107g
145mm spindle = 113g
165mm CR1 cranks with 136mm spindle = 680g
32T 8-bolt chainring SRAM TT 8 bolt = 72g

Recently viewed